Monitors

From Lupyan Lab
Jump to: navigation, search

Installing the Xrite Software

  1. Download drivers from Xrite
  2. Right-click on the ZIP folder and choose to extract the files
    • Once the files are extracted, you can delete the ZIP folder
  3. Plug in the i1 Display 2 unit
  4. Go to Device Manager. Find and double-click on the "i1 Display" entry
    • Start Menu - Control Panel - Hardware and Sound - Device Manager
  5. Click "Update Driver" and then Browse to the downloaded driver folder. Select the folder and press OK. Follow directions and install device
    • If the same pop-up box continues popping up at the end of the installation, it is OK to press cancel - the installation will still finish
  6. Download i1 Match software from Xrite. Run and Install.
  7. Now all software is installed. The Xrite can now be used at any time by just plugging it into the computer and selecting i1 Match off the Start Menu
Personal tools
Namespaces
Variants
Actions
Navigation
HowTos
Troubleshooting
Scripts
Toolbox